Humber Pullman (1946)
The Car
Coming soon
The Specs
Below are the technical specifications and any performance numbers we could get.
Engine
Bore & Stroke | 85mm x 120mm |
Displacement |
4086cc
|
Firing order | 1,5,3,6,2,4 |
Oil pressure (hot) |
45 – 50 lb./sq. in.
|
Fuel Supply
Carburetor | Stromberg D/D DBVA42 |
Choke | Automatic |
Main | L1292 |
Metering | 0.065″ |
By-pass | 0.054″ |
Slow Running | 64 |
Valving
Intake tappet clearance |
0.010″ (cold)
|
Exhaust tappet clearance |
0.010″ (cold)
|
Valve-timing indication | Crankshaft pulley and timing case cover |
Intake valve opens |
5° BTDC
|
Ignition
Breaker gap | 0.010″ – 0.012″ |
Plug gap | 0.028″ – 0.032″ |
Ignition timing indication |
Crankshaft pulley and timing case cover
|
Ignition timing |
6° BTDC
|
Clutch
Clutch type | Borg & Beck Single Dry Plate |
Clutch linings |
Moulded Ferodo
|
Brakes
Brake type |
Lockheed Hydraulic
|
Brake linings | Mintex NMT |
Wheel Alignment
Toe-In | 1⁄8“ |
Camber | 1° |
Caster angle | 2° 23′ |
King pin angle |
10°
|