Standard Ensign (1957-58)
The Car
Coming soon
The Specs
Below are the technical specifications and any performance numbers we could get.
Engine
Bore & Stroke |
85mm x 92mm |
Displacement |
2088cc |
Firing order |
1,3,4,2 |
Oil pressure (hot) |
70 lb./sq. in.
|
Fuel Supply
Carburetor |
Twin SU HD6 |
Needle |
TC |
Valving
Intake tappet clearance |
0.010″ (cold) |
Exhaust tappet clearance |
0.010″ (cold) |
Valve-timing indication |
Timing cover and crankshaft pulley. Chainwheels marked. |
Intake valve opens |
Intake and exhaust valves should be equally open at TDC on exhaust stroke at 0.0165″ rocker clearance |
Ignition
Breaker gap |
0.015″ |
Plug gap |
0.025″ |
Ignition timing indication |
Pointer on timing cover and boss in crankshaft pulley |
Ignition timing |
9° BTDC |
Clutch
Clutch type |
Borg & Beck Single Dry Plate |
Clutch linings |
9″ |
Brakes
Brake type |
Girling Hydraulic |
Brake linings |
10″x2¼” |
Wheel Alignment
Toe-In |
Parallel to 1⁄16“ |
Camber |
2° + VE static laden |
Caster angle |
1° 30′ – VE static laden |
King pin angle |
5½° static laden |