Series 61 Cadillac Models & History 1946
All1946 Cadillacs were a continuation of pre-war styling and engineering with the unpopular 63 and 67 Series being dropped. Features common to each series included:
- dual downdraft carburetors
- Torbend disc clutch
- directional signals
- knee action wheels
- double ride stabilizers
- permanently lubricated universals
- ball bearing steering
- mechanical fuel pump
- oil bath air cleaner
- intake silencer
- automatic choke
- Synchromesh transmission
- sealed beam lighting
- front coil springs
- Super-Safe hydraulic brakes
- wax lubricated rear springs
- hypoid rear axle
- slotted disc wheels
- low pressure tires
- large luggage compartments
- safety plate glass throughout
Cadillac’s lowest-priced Series 61 line was based on the General Motors’ B-Body, also used on cars in the Buick 40, Olds 70 and Pontiac 26 and 28 series. Fastback styling characterized the two available body styles which saw a late production startup in May, 1946. Standard features included
- small hub caps
- a wider, more massive grille
- bullet-shaped front and rear fenders
- skirted rear wheel openings
- chrome-plated rear fins
The gas filler cap was located under the rear signal lamp.
I. D. DATA
- Cadillac serial numbers matched the motor numbers and were used for all license, insurance and identification purposes.
- For 1946 they were located on the right-hand side of the engine crankcase, just above the water pump, and on the right frame side member, behind the motor support.
- Numbers 5400001 to 5402975 appeared on Series 61 models.
STYLE
| Model Number | Body Style | Doors | Model | Seating | Factory Price | Shipping Weight | Production Total |
|---|---|---|---|---|---|---|---|
| 46-61 | 6107 | 2-door | Club Coupe | 5 | $2052 | 1884 kg | 800 |
| 46-61 | 6109 | 4-door | Sedan | 5 | $2176 | 1920 kg | 2,200 |
| 46-61 | Chassis only | 1 |
ENGINE
1946 Cadillac
| Type | V-8 L-head. |
| Block | Cast iron block. |
| Displacement | 5.678 Liter |
| Bore and stroke | 88.9mm x 114.3mm |
| Compression ratio | 7.25:1. |
| Brake horsepower | 150 hp @ 3400 rpm |
| Power | 112 kW @ 3400 rpm |
| Main bearings | Three main bearings. |
| Valve lifters | Hydraulic valve lifters. |
| Carburetor | Carter WCD two-barrel (models 595S or 595SA) or Stromberg AAV-26 two-barrel (models 380154 or 380871). |
CHASSIS
| Model | Wheelbase | Overall Length | Front Tread | Rear Tread | Tires |
|---|---|---|---|---|---|
| Series 61 | 3200mm | 5461mm | 1499mm | 1600mm | 7.00 x 15 |
| Series 62 | 3277mm | 5588mm | 1499mm | 1600mm | 7.00 x 15 |
| Series 60S | 3378mm | 5690mm | 1499mm | 1600mm | 7.00 x 15 |
| Series 75 | 3454mm | 5766mm | 1499mm | 1600mm | 7.50 x 16 |
