Lancia Appia Series Ii (1957-58)
The Car
Coming soon
The Specs
Below are the technical specifications and any performance numbers we could get.
Engine
Bore & Stroke | 68mm x 75mm |
Displacement |
1090cc
|
Firing order |
1,3,4,2
|
Oil pressure (hot) |
–
|
Fuel Supply
Carburetor | Solex C32. PBIC |
Main |
120
|
Slow Running |
45
|
Choke |
23.5mm
|
Compensating |
180
|
Starter Jet |
130
|
Valving
Intake tappet clearance |
0.006″ (hot)
|
Exhaust tappet clearance |
0.008″ (hot)
|
Valve-timing indication | ‘O’ on Flywheel |
Intake valve opens |
4° BTDC at 0.032″ clearance with ‘O’ on flywheel in line with ¼ on casing
|
Ignition
Breaker gap | 0.012″ – 0.016″ |
Plug gap | 0.024″ – 0.028″ |
Ignition timing indication |
‘A/A’ on clutch casing
|
Ignition timing |
‘O’ on flywheel in line with ‘A/A’ on clutch casing
|
Clutch
Clutch type | Single Dry Plate |
Clutch linings |
Brakes
Brake type |
Sabif Hydraulic
|
Brake linings |
Wheel Alignment
Toe-In | 0.16″ to 0.24″ measured with car jacked up |
Camber | 1° |
Caster angle | 0° |
King pin angle |
1°
|